Sharp R1S Dual SIM TD-LTE FS8028 Full Device Specifications
You are currently previewing Sharp R1S Dual SIM TD-LTE FS8028 full device specifications. View all our devices list for other models.
- Released Date
- 2018 Feb
- Display Dimension
- 720x1280 pixels
- RAM Size
- 3072 MiB RAM
- Processor (CPU)
- MediaTek MT6750
- Battery Capacity
- 5000 mAh battery
- Device Camera
- 12.8 MP camera
Ratings and Reviews
Add YoursTotal average ratings from 2 different users
Introduction
Sharp
R1S Dual SIM TD-LTE FS8028
2018 Feb
2018 Feb 4
Foxconn
InFocus Corporation
Haptic touch feedback
Smartphone
2.5D Curved Glass
Physical Attributes
80 mm, 3.15 inch
150 mm, 5.91 inch
9 mm, 0.35 inches
108 ccm
160 g, 5.64 ounces
Software Environment
Google Android
Google Android 7.0 (Nougat)
Voice Command , Navigation software
Application processor, Chipset
1500 MHz
MediaTek MT6750, 2016, 64 bit, octa-core, 32 Kbyte I-Cache, 32 Kbyte D-Cache, 512 Kbyte L2, 28 nm, ARM Mali-T860 GPU
Operative Memory
mobile (LP) DDR3 SDRAM
3072 MiB RAM
Non-volatile Memory
Flash EEPROM
eMMC 5.1
30518 MiB non-volatile
Display
139.7 mm, 5.5 inch
720x1280, 921600 pixels
68.49 mm, 2.7 inch
121.76 mm, 4.79 inch
11.51 mm
8339.2 square millimeter
69.5%
0.09512 mm/pixel
267 PPI
Color IPS TFT LCD display
24 bit/pixel
16.8M
8 bit/pixel
Yes
Yes
RGB Matrix (3 subpixels)
Yes
Graphical Subsystem
ARM Mali-T720MP2
Audio/Video Interfaces
No
Audio Subsystem
stereo
Sound Recording
Yes
Sound Playing
mono
3.5mm
Cellular Phone
GSM 850MHz (B5) , GSM 900MHz (B8) , GSM 1800MHz (B3) , GSM 1900MHz (PCS, B2) , UMTS 2100MHz (Band I, IMT) , UMTS 1900MHz (Band II, PCS) , UMTS 850MHz (Band V, CLR) , UMTS 900MHz (Band VIII) , LTE 2100 MHz (Band 1) , LTE 1800 MHz (Band 3) , LTE 850 MHz (Band 5) , LTE 2600 MHz (Band 7) , LTE 900 MHz (Band 8) , TD-LTE 2300 MHz (Band XL) bands
GPRS (Class unspecified) , EDGE (Class unspecified) , UMTS 384 kbps (W-CDMA) , HSUPA (Cat. unspecified) , HSDPA (Cat. unspecified) , HSPA+ 21.1 Mbps (Cat. 18) , LTE (Cat. unspecified) , LTE 100 Mbps / 50 Mbps (Cat. 3) , LTE 150 Mbps / 50 Mbps (Cat. 4) data links
Nano-SIM (4FF)
Internal antenna
64-chord melody
Voice transmission , Voice speaker , Vibrating Alert , Speakerphone , ANC , HD Voice , Voice over LTE (VoLTE)
Mediatek MT6750
Secondary Cellular Phone
Dual standby
GSM 850MHz (B5) , GSM 900MHz (B8) , GSM 1800MHz (B3)
GPRS (Class unspecified) , EDGE (Class unspecified)
Nano-SIM (4FF), Internal antenna
Mediatek MT6750
Control Peripherals
Capacitive multi-touch sensing screen
Yes
Communication Interfaces
TransFlash , microSD , microSDHC
USB 2.0, USB Hi-Speed (480 Mbps)
USB charging , USB Host , USB On-The-Go 1.3 , USB Power Delivery
USB Series Micro-B (Micro-USB)
Bluetooth 4.2, Internal antenna
A2DP , AVRCP , HFP , HSP
IEEE 802.11b , IEEE 802.11g , IEEE 802.11n, Internal antenna
Wi-Fi Tethering
Multimedia Broadcast
Unknown
Satellite Navigation
GPS (NMEA 0183)
Internal antenna
Simultaneous GPS (S-GPS) , Assisted GPS , Geotagging , QuickGPS
L1OF
Mediatek MT6750
Primary Camera System
Rear
BSI CMOS
4128x3096 pixel
12.8 MP camera
f/2.00
1.0 x optical zoom
Contrast Detection Autofocus (CD AF)
JPG
1920x1080 pixel, 30 fps
3GP , MPEG4
dual LED
HDR photo , Red-eye effect reduction , Burst mode , Macro mode , Panorama Photo , Face detection , Smile detection , Face retouch
Auxiliary Camera
Yes
4.9 MP aux. cam
f/2.00
Auxiliary Camera No. 2
No
Auxiliary Camera No. 3
No
Auxiliary Camera No. 4
No
No
Secondary Camera System
Front
BSI CMOS
3264x2448 pixel
8.0 MP sec. cam
f/2.40
JPG
1280x720 pixel
3GP
Face detection , Face retouch
Secondary Auxiliary Camera
No
Secondary Auxiliary Camera No. 2
No
Built-in Sensors
Yes
Yes
Yes
Fingerprint sensor , Light intensity sensor , Proximity sensor
Ingress Protection
Yes
Yes
Power Supply
Yes, built-in, 1-cell
5000 mAh cell
5000 mAh battery
Geographical Attributes
Indonesia , Vietnam
Asia
Disclaimer: DeviceBeast can not guarantee that the information on this page is 100% correct
Discussion
Start a new discussion for Sharp R1S Dual SIM TD-LTE FS8028 specifications. Please be fair to others, for the full rules do refer to the Discussion Rules page.
